Vape Coils 37 Products
Vape Coils
Shop our comprehensive range of authentic replacement vape coils from the world’s leading manufacturers, including Vaporesso, SMOK, Geekvape, Voopoo, Aspire, Innokin, and HorizonTech. The coil is the engine of your vape device, responsible for converting e-liquid into smooth, flavourful vapour. Whether you need high-resistance MTL coils for smooth nicotine salts or high-powered sub-ohm mesh coils for cloud chasing, find genuine coils with fast UK delivery.
Understanding How Vape Coils Work
Inside every vape tank or pod cartridge sits an atomiser coil. It consists of a conductive metal heating element (such as mesh grid or round wire) encased in organic absorbent cotton. When you press the fire button or draw on the mouthpiece, battery current heats the element, instantly vaporising the e-liquid held in the cotton. Using fresh, genuine coils is the single most important factor in maintaining crisp flavour, preventing dry hits, and stopping leaks.
- Mesh vs Traditional Round Wire: Modern mesh coils feature an etched perforated metal sheet that covers a wider surface area of the cotton. This results in faster ramp-up speeds, more even heat distribution, virtually zero hot spots, and noticeably richer flavour reproduction.
- Sub-Ohm Coils (Below 1.0Ω): Engineered for Direct-to-Lung (DTL) vaping. They allow higher electrical currents, producing warm, voluminous clouds with 70% VG shortfills.
- Plus-Ohm / MTL Coils (1.0Ω and Above): Designed for Mouth-to-Lung (MTL) vaping at low wattages (10W–15W). Mimics the tight inhale of a cigarette, pairing perfectly with 50/50 nic salts.
- 100% Genuine Manufacturer Guarantee: We exclusively supply factory-sealed genuine coil packs with authenticity scratch-off labels.
Popular Coil Families Compatibility Guide
Identify which replacement coil fits your device using our compatibility summary:
| Coil Series | Manufacturer | Popular Resistances | Compatible Devices |
|---|---|---|---|
| Vaporesso GTX Coils | Vaporesso | 0.15Ω, 0.2Ω, 0.3Ω, 0.6Ω, 0.8Ω, 1.2Ω | Luxe XR Max, Target PM80, Gen Nano, GTX GO series. |
| Voopoo PnP & PnP X | Voopoo | 0.15Ω, 0.2Ω, 0.3Ω, 0.6Ω, 0.8Ω | Drag 4, Drag S2, Drag X2, Argus Pro, Vinci series. |
| Geekvape Z (Zeus) Series | Geekvape | 0.15Ω, 0.2Ω, 0.25Ω Dual, 0.4Ω | Zeus Sub-Ohm Tank, Aegis Legend 2 (L200), Aegis Solo 2. |
| SMOK RPM & RPM 3 | SMOK | 0.15Ω, 0.23Ω, 0.4Ω Mesh | Nord 4, Nord 5, RPM 4, RPM 85, RPM 100. |
| Aspire Nautilus BVC | Aspire | 0.7Ω Mesh, 1.6Ω, 1.8Ω BVC | Nautilus 3, Nautilus GT, Zelos 3 Kit, K3 Tank. |
How to Prime a New Vape Coil in 4 Easy Steps
Failing to prime a fresh coil is the number one cause of burnt coils. Always follow this routine:
- Pre-Saturate the Cotton: Before inserting the coil into the tank, drip 3 to 5 drops of e-liquid directly into the top of the coil cotton and onto each exposed wicking hole on the sides.
- Install & Fill Tank: Push or screw the coil firmly into the tank base, fill the tank completely with e-liquid, and seal the top cap.
- Wait 10 Minutes: Allow the tank to stand upright for 10 minutes. This gives capillary action time to saturate the inner core of the cotton fully.
- Break In at Low Wattage: Set your device 10W below the recommended wattage. Take 3 to 4 gentle puffs, then gradually step the wattage up to your preferred sweet spot.
When Should You Replace Your Vape Coil?
Coils naturally degrade over time due to heat cycling and sweetener caramelisation. Look out for these telltale signs:
- Burnt or Bitter Taste: The clearest indicator that the wicking cotton has scorched. Once burnt, the taste will not recover and the coil must be replaced.
- Reduced Vapour Production: If your vapour feels thin or lacks warmth despite a fully charged battery, carbon buildup is insulating the heating wire.
- Gurgling & Leaking: When cotton fibres break down, they lose surface tension and can no longer hold e-liquid, leading to pooling and flooding.
- Dark Discoloration: Old e-liquid residue leaching back into the tank turns clear e-liquid dark brown or black.
Frequently Asked Questions About Vape Coils
How long should a vape coil last?
On average, a vape coil lasts between 1 to 2 weeks (approximately 20ml to 40ml of e-liquid). Lifespan depends heavily on e-liquid sweetness, vaping frequency, and whether you stay within recommended wattage limits.
Why did my brand-new coil burn out immediately?
A brand-new coil burns out if fired without adequate priming. If the cotton inside is dry when power is applied, the heat instantly singes the cotton fibres. Always prime and let fresh coils sit in a full tank for 10 minutes before firing.
Can I wash and reuse a burnt vape coil?
No. While washing with warm water can temporarily rinse away excess e-liquid residue, it cannot repair charred cotton fibres. Once a coil is burnt, it must be replaced.
What wattage should I run my vape coil at?
Every genuine coil has its optimal wattage range laser-etched onto the metal barrel (e.g., "30W - 40W, BEST 35W"). Running your mod within the "BEST" range guarantees optimal flavour and maximum longevity.
How do I know which coil fits my vape?
Check the product manual of your device or examine the base of your existing coil where the model name (e.g., "GTX", "PnP", "Z Coil") is stamped. You can also match your tank name against our detailed compatibility tables.