Geekvape Vapes 12 Products
Geekvape Vapes
Shop our industry-leading range of authentic Geekvape vapes, shockproof mods, starter kits, and replacement coils. Famed worldwide for military-grade build quality and leak-proof engineering, Geekvape sets the benchmark for indestructible hardware. From legendary IP68-rated Aegis box mods and leak-free Z (Zeus) Sub-Ohm tanks to the sleek Wenax and Sonder pod kits, our 100% TPD-compliant Geekvape collection delivers peak reliability, robust flavour, and fast UK delivery.
Why Geekvape Dominates Rugged & Reliable Vaping
Founded in 2015, Geekvape revolutionized the vaping market by introducing the concept of "Tri-Proof" durability: hardware engineered to withstand accidental drops, water immersion, and dusty environments without missing a beat. Beyond exceptional toughness, Geekvape is recognized for groundbreaking atomisation advancements, such as top-to-bottom leak-proof airflow systems and the cutting-edge AS chipset.
- Military-Grade IP68 Tri-Proof Protection: Geekvape’s flagship Aegis series devices feature water-resistant silicone casings, aircraft-grade aluminium alloy frames, and shock-absorbent bumpers built to survive active lifestyles and industrial environments.
- A-Lock Accidental Firing Protection: A dedicated physical sliding lock switch on the side of modern Aegis devices prevents accidental pocket firing and burnt coils without needing five rapid button clicks.
- Top-to-Bottom Leak-Proof Airflow: Patented on the renowned Z (Zeus) Sub-Ohm tank line, air enters through adjustable top slots and travels downward to the coil base, virtually eliminating bottom condensation and messy leaks.
- Advanced AS 3.0 Chipset: Provides intelligent SMART mode that automatically identifies coil resistance and locks safe wattage limits, along with BOOST mode for maximum power output throughout each puff.
Geekvape Device Range Breakdown
Whether you need an ultra-rugged workhorse or a sleek pocket pod kit, compare Geekvape's signature lineups below:
| Series | Vaping Style | Battery / Power | Key Highlights |
|---|---|---|---|
| Aegis Legend 2 (L200) / Aegis Touch | Direct-to-Lung (DTL) | Dual 18650 / Up to 200W | Full IP68 waterproof, shockproof, and dustproof build; paired with the leak-proof Z Sub-Ohm tank. |
| Aegis Solo 2 (S100) / Mini 2 (M100) | Direct-to-Lung (DTL) | Single 18650 or 2500mAh / Up to 100W | Compact single-battery Tri-proof performance; ideal for mid-power sub-ohm vapers. |
| Aegis Hero 2 (H45) / Boost Pro | MTL to Sub-Ohm (RDL/DTL) | 1400mAh – 2000mAh / Up to 45W–100W | Rugged pocket pod mods using Geekvape B Series mesh coils with top airflow control. |
| Sonder Q / Wenax Q Series | Mouth-to-Lung (MTL) | 1000mAh / Up to 25W | Ultra-lightweight beginner pod kits with precision airflow and Geekvape Q top-fill pods. |
Geekvape Coil Compatibility & Best Practices
To enjoy maximum coil life and pristine flavour, match your e-liquid formulation with your Geekvape coil family:
- Geekvape Q Pods (0.8Ω & 1.2Ω): Engineered for Sonder Q and Wenax Q devices. Best paired with 50/50 Nicotine Salts (10mg/20mg) or 50/50 freebase liquids for an authentic cigarette-like draw.
- Geekvape B Series Coils (0.4Ω & 0.6Ω): Used in the Aegis Hero 2 (H45) and Boost range. Ideal for Restricted Direct Lung (RDL) vaping with 50/50 nic salts or 70/30 shortfills at 15W–35W.
- Geekvape Z Series Coils (0.15Ω, 0.2Ω, 0.4Ω Mesh): Built for the flagship Z Sub-Ohm tank. Designed specifically for 70% VG or higher shortfill e-liquids fired between 50W and 85W for dense, rich clouds.
Optimising Power Modes on Geekvape AS Chipsets
Modern Geekvape devices powered by the AS 3.0 chipset feature several operating modes tailored to different vaping preferences:
- SMART Mode: The safest mode for beginners and everyday users. The device reads the coil's precise ohm resistance, recommends the ideal starting wattage, and locks the maximum wattage so you cannot accidentally overheat or scorch the coil.
- POWER (Wattage) Mode: Standard variable wattage allowing you full manual control across the entire wattage spectrum.
- BOOST Mode: Automatically adjusts output to deliver the maximum power possible for the installed coil, creating immediate vapour ramp-up and a warmer, more intense cloud.
- VPC (Variable Power Curve) Mode: Allows advanced users to customise the power output in half-second increments across a puff (e.g., a high initial burst followed by a gentler sustaining wattage).
Troubleshooting Common Geekvape Warnings
If your Geekvape screen indicates a warning prompt, refer to the following guide:
- "Atomizer Short": Remove the tank or pod. Check that the coil is pressed all the way into the base. Ensure the 510 pin on the bottom of the tank and the top of the mod are clean and free of moisture or debris.
- "No Atomizer": The mod is not detecting a circuit. Ensure the coil head has not loosened. On pod kits like the Sonder Q or Wenax Q, clean the gold spring-loaded pins inside the pod housing.
- "Device Locked": Verify whether the physical A-Lock slider on the left side of the mod has been pushed into the locked position. Slide it back up to unlock.
Maintenance & Care Guide for Tri-Proof Hardware
While Geekvape Aegis mods are IP68 certified against water and dust, routine maintenance ensures long-lasting aesthetics and operation. If your device gets dirty or exposed to mud on a job site, wipe the silicone body with a damp cloth; avoid harsh chemical detergents. Always ensure the USB Type-C charging port rubber flap is securely pressed shut before exposing the device to moisture. If using external 18650 or 21700 batteries, inspect the battery wraps regularly to ensure they remain intact with zero tears.
Frequently Asked Questions About Geekvape
What makes Geekvape Aegis kits waterproof and shockproof?
Geekvape Aegis devices are certified to IP68 standards, meaning they can survive full water immersion up to 1 metre for 30 minutes. They are built with high-grade zinc alloy frames, durable LSR silicone seals around battery doors and ports, and impact-resistant chassis corners.
What does the "A-Lock" switch on my Geekvape device do?
The A-Lock is a patented mechanical sliding switch located on the side of modern Aegis devices (like the L200, S100, and M100). Sliding it locks the entire device immediately, preventing accidental button firing in pockets or bags without needing to shut down the mod.
Why is my Geekvape Z Sub-Ohm tank praised for not leaking?
The Geekvape Z (Zeus) tank features a top-airflow design. Air enters through dual slots at the top of the tank and travels down double internal walls to the coil base. Because there are no airflow holes at the bottom of the tank, e-liquid cannot leak onto your 510 mod connection.
How do I prime Geekvape Z Series and B Series coils?
Before installing a fresh coil, drip 4–5 drops of e-liquid directly into the centre cotton and the exposed side wicking holes. Install the coil into the tank, fill with e-liquid, and let it rest for 10 minutes before firing at a lower wattage to break in the cotton gently.
Are Geekvape devices purchased on Vapeslane authentic?
Yes. Every Geekvape device, replacement glass, and coil pack sold on Vapeslane is 100% genuine and sourced through authorized UK distributors. Every box contains a scratch-and-check security code for online verification.